園區占地面積
floor space
工廠面積
factory space
工廠員工
employee
HVAC總裝線7條
鼓風機總裝線2條
高低壓PTC裝配線1條
制造能力:50萬套/年
HVAC Lines7 Line
Blower Motor Assembly Lines2 Line
High and Low Pressure PTC Assy1 Line
Manufacturing Capacity500,000sets/year
全在線所有電器性能檢測
身份識別
數據存儲
All Online Electrical Performance Testing
Identification
Data Storage
全在線拍照檢查
圖片儲存
Full online photo check
Picture Storage
所有螺釘扭力及數量計數控制
零部件身份識別
All Screw Torque and Quantity Counting Control
Component Identification
在線鹵素檢測
Online Halogen Detection
冷凝器芯體裝配線5條
蒸發器芯體裝配線7條
散熱器水箱裝配線2條
Chiller裝配線1條
全自動親水處理線1條
制造能力:270萬套/年
Condenser Core Assembly Line5 Line
Evaporator Core Assembly Line7 Line
Radiator Water Tank Assembly Line2 Line
Chiller Assembly Line1 Line
Fully Automatic Hydrophilic Treatment Line1 Line
Manufacturing Capacity2,700,000sets/year
采用靜電干噴工藝
溫區控制精度:±0.5℃
氧濃度:≤50PPM
Electrostatic Dry Spray Process
Temperature Zone Control Accuracy: ±0.5°C
Oxygen Concentration: ≤50PPM
單線裝配效率:45s/pc
Single Line Assembly Efficiency:45s/pc
單線裝配效率:45s/pc
Single Line Assembly Efficiency:45s/pc
氦檢精度:2.5×10-9 Pa.m3/S
年泄露量≤2g
Helium Detection Accuracy:2.5×10-9 Pa.m3/S
Annual Leakage:≤2g
HAITIAN伺服節能注塑機24臺
制造能力:50萬套/年
HAITIAN Servo Energy-Saving Injection Molding Machine24 sets
Manufacturing Capacity500,000sets/year
200T,230T,340T,600T,800T
120T
250T
4 套
4 sets
管路總裝線4條
端末、旋溝、彎管機24臺
加工機床50臺
下料和扣壓設備16臺
自動水檢臺2臺
制造能力:80萬套/年
Pipeline final assembly line4 Line
End,winding groove,pipe bender24 sets
Machine tool50 sets
Blanking and withholding equipment16 sets
Automatic water inspection table2 sets
Manufacturing Capacity800,000sets/year
兩臺自動上料機+兩臺
彎管機+ABB機器人一臺
Two automatic feeders
Two pipe bender One ABB robot
自動上料機+端末、旋溝一體機,效率更高,質量更穩定
Automatic feeding machine + end - end spiral groove machine, higher efficiency, more stable quality
可完成公司所有兩器及管路所需零件(壓板、接頭、螺母、外牙及管夾等)的加工
It can complete the processing of all the necessary parts (pressure plate, joint, nut, outer tooth and pipe clamp, etc.) of the company's two devices and pipes
加工后的零件及管路全部通過超聲波清洗機清洗,清洗效率及效果更佳
The processed parts and pipelines are all cleaned by ultrasonic cleaning machine, cleaning efficiency and effect are better.